Axis Communications AXIS A1001 Network Door Controller — Default Password
Default username and password for the Axis Communications AXIS A1001 Network Door Controller: root / (blank). Learn how to log in at 192.168.0.90 and how to change the default credentials.
Axis A1001 is a network-connected physical access control door controller supporting up to two readers (Wiegand, RS-485, OSDP). The 'root' account is permanently built-in and cannot be deleted. Unlike many devices, there is NO factory-set default password — Axis adopted a no-default-password policy across all edge devices. On first access, the administrator must create a root password via the web setup wizard before any configuration is possible. If the root password is lost, the device must be physically factory-reset. Default IP of 192.168.0.90 applies when no DHCP server is present on the network.
| Username | Password | Access | Version / firmware | Notes |
|---|---|---|---|---|
root | (blank / none) | Web UI | All firmware versions | No factory-set default password. Root password must be created during first-access setup wizard. Device is locked until password is configured. |
- Default IP
- 192.168.0.90
Responsible use
This database lists publicly documented default credentials so administrators can find and change them. Only use these on systems you own or are authorized to test.
Related devices
root/passWeb UIroot/passWeb UIroot/passWeb UIroot/passTelnetpi/raspberrySSHdebian/temppwdSSH