Gina Häußge (OctoPrint) OctoPrint 3D Printer Web Interface — Default Password
Default username and password for the Gina Häußge (OctoPrint) OctoPrint 3D Printer Web Interface: (blank) / (blank). Learn how to log in and how to change the default credentials.
OctoPrint prior to 1.4.0 shipped with access control disabled by default, allowing unauthenticated access to anyone on the network. Access Control was made mandatory starting in 1.4.0.
| Username | Password | Access | Version / firmware | Notes |
|---|---|---|---|---|
(blank / none) | (blank / none) | Web UI | <1.4.0 | — |
- Source
- vendor documentation
Responsible use
This database lists publicly documented default credentials so administrators can find and change them. Only use these on systems you own or are authorized to test.
Related devices
IoT Device
Raspberry Pi
Raspberry Pi OS
pi/raspberrySSHIoT Device
FriendlyElec
NanoPi SBC
root/faSSHIoT Device
Raspberry Pi Foundation
Raspberry Pi OS (Raspbian)
pi/raspberryConsoleIoT Device
BeagleBoard.org
BeagleBone Black
debian/temppwdSSHIoT Device
Hardkernel
ODROID Single Board Computer
odroid/odroidSSHIoT Device
Orange Pi
Orange Pi SBC
root/orangepiSSH