Sungrow WiNet-S Communication Module (SH/SG Inverter Series) — Default Password
Default username and password for the Sungrow WiNet-S Communication Module (SH/SG Inverter Series): admin / pw8888. Learn how to log in at 11.11.11.1 and how to change the default credentials.
11.11.11.1 is the AP-mode hotspot IP used when the module is not yet connected to a Wi-Fi network. CVE-2024-50692 covers hardcoded MQTT credentials in WiNet-S firmware before P028. Change defaults after installation.
| Username | Password | Access | Notes |
|---|---|---|---|
admin | pw8888 | Web UI | Installer/admin account for the WiNet-S local web interface. |
user | pw1111 | Web UI | End-user read-only account. |
- Default IP
- 11.11.11.1
Responsible use
This database lists publicly documented default credentials so administrators can find and change them. Only use these on systems you own or are authorized to test.
Related devices
IoT Device
Sungrow
EyeM4 WiFi Logger
∅/pw1111Web UIIoT Device
Raspberry Pi
Raspberry Pi OS
pi/raspberrySSHIoT Device
FriendlyElec
NanoPi SBC
root/faSSHIoT Device
BeagleBoard.org
BeagleBone Black
debian/temppwdSSHIoT Device
Hardkernel
ODROID Single Board Computer
odroid/odroidSSHIoT Device
Raspberry Pi Foundation
Raspberry Pi OS (Raspbian)
pi/raspberryConsole