WLED Project (Aircoookie) WLED Open-Source LED Controller Firmware (ESP8266 / ESP32) — Default Password
Default username and password for the WLED Project (Aircoookie) WLED Open-Source LED Controller Firmware (ESP8266 / ESP32): (blank) / wled1234. Learn how to log in at 4.3.2.1 and how to change the default credentials.
On first boot, broadcasts Wi-Fi access point 'WLED-AP' with password 'wled1234'. After connecting to WLED-AP, browse to 4.3.2.1 (or wled.me) to reach the web UI which requires NO authentication. OTA firmware update default passphrase: 'wledota'. Security guide: https://github.com/wled/WLED/wiki/Security
| Username | Password | Access | Notes |
|---|---|---|---|
(blank / none) | wled1234 | Web UI | Wi-Fi AP 'WLED-AP' password; web UI itself has no authentication |
- Default IP
- 4.3.2.1
Responsible use
This database lists publicly documented default credentials so administrators can find and change them. Only use these on systems you own or are authorized to test.
Related devices
IoT Device
Raspberry Pi
Raspberry Pi OS
pi/raspberrySSHIoT Device
FriendlyElec
NanoPi SBC
root/faSSHIoT Device
Raspberry Pi Foundation
Raspberry Pi OS (Raspbian)
pi/raspberryConsoleIoT Device
BeagleBoard.org
BeagleBone Black
debian/temppwdSSHIoT Device
Hardkernel
ODROID Single Board Computer
odroid/odroidSSHIoT Device
Orange Pi
Orange Pi SBC
root/orangepiSSH