Axis Communications AXIS A1001 Network Door Controller — Default Password
Default username and password for the Axis Communications AXIS A1001 Network Door Controller: root / (blank). Learn how to log in at 192.168.0.90 and how to change the default credentials.
Axis A1001 is a network-connected physical access control door controller supporting up to two readers (Wiegand, RS-485, OSDP). The 'root' account is permanently built-in and cannot be deleted. Unlike many devices, there is NO factory-set default password — Axis adopted a no-default-password policy across all edge devices. On first access, the administrator must create a root password via the web setup wizard before any configuration is possible. If the root password is lost, the device must be physically factory-reset. Default IP of 192.168.0.90 applies when no DHCP server is present on the network.
| Usuario | Contraseña | Acceso | Versión / firmware | Notas |
|---|---|---|---|---|
root | (vacío / ninguno) | Web UI | All firmware versions | No factory-set default password. Root password must be created during first-access setup wizard. Device is locked until password is configured. |
- IP predeterminada
- 192.168.0.90
Uso responsable
Esta base de datos enumera credenciales predeterminadas documentadas públicamente para que los administradores puedan encontrarlas y cambiarlas. Úsalas solo en sistemas que poseas o que estés autorizado a probar.
Dispositivos relacionados
root/passWeb UIroot/passWeb UIroot/passTelnetroot/passWeb UIpi/raspberrySSH∅/∅Web UI