HPE (Hewlett Packard Enterprise) ProLiant iLO 4 / iLO 5 (Integrated Lights Out — Gen8/Gen9/Gen10/Gen10+) — Default Password

Q: What is the default username and password for the HPE (Hewlett Packard Enterprise) ProLiant iLO 4 / iLO 5 (Integrated Lights Out — Gen8/Gen9/Gen10/Gen10+)?

The default login for the HPE (Hewlett Packard Enterprise) ProLiant iLO 4 / iLO 5 (Integrated Lights Out — Gen8/Gen9/Gen10/Gen10+) is: Administrator / (web-ui); Administrator / (ssh).

Q: How do I change the default password on the HPE (Hewlett Packard Enterprise) ProLiant iLO 4 / iLO 5 (Integrated Lights Out — Gen8/Gen9/Gen10/Gen10+)?

Log in with the default credentials, then open the administration / user settings and set a strong, unique password. Leaving default credentials in place is a serious security risk — change them immediately on any production device.

Default username and password for the HPE (Hewlett Packard Enterprise) ProLiant iLO 4 / iLO 5 (Integrated Lights Out — Gen8/Gen9/Gen10/Gen10+): Administrator / <unique 8-character string printed on iLO server tag label>. Learn how to log in and how to change the default credentials.

HPE iLO 4 (ProLiant Gen8, Gen9) and iLO 5 (ProLiant Gen10, Gen10+) ship with a unique, randomly-generated 8-character initial password printed on a physical iLO tag label affixed to the server (a pull-tab on the front panel, a toe tag, or the serial number label on the rear chassis). The username is always 'Administrator'. The iLO DNS hostname is also printed on the tag in the format ILO<serialnumber>. IP is acquired via DHCP by default. HPE recommends immediately changing the password after initial access. Some older or stripped SKUs shipped without a tag and may have defaulted to admin/admin — always verify the physical server tag.

Usuario	Contraseña	Acceso	Versión / firmware	Notas
`Administrator`	`<unique 8-character string printed on iLO server tag label>`	Web UI	iLO 4 (Gen8/Gen9) and iLO 5 (Gen10/Gen10+)	Unique password per unit, printed on physical iLO label. IP assigned via DHCP; hostname: ILO<serialnumber>. Access at https://<iLO-IP> (port 443).
`Administrator`	`<unique 8-character string printed on iLO server tag label>`	SSH	iLO 4 / iLO 5	Same credentials as web interface for SSH CLI access.

Puerto predeterminado: el servicio SSH en el puerto 22
Fuente: HPE Support — iLO 5 Default Credentials (sf000046874en_us)

Uso responsable

Esta base de datos enumera credenciales predeterminadas documentadas públicamente para que los administradores puedan encontrarlas y cambiarlas. Úsalas solo en sistemas que poseas o que estés autorizado a probar.