Skip to content
ICS / SCADA

Omron NJ / NX Series Machine Automation Controller (Sysmac Platform) — Default Password

Default username and password for the Omron NJ / NX Series Machine Automation Controller (Sysmac Platform): (blank) / (blank). Learn how to log in and how to change the default credentials.

User Authentication is disabled by default on Omron NJ (NJ101, NJ301, NJ501) and NX (NX1P2, NX102, NX502, NX702) controllers running firmware earlier than v1.49. Any host on the network can connect to port TCP 44818 (EtherNet/IP) via Sysmac Studio without credentials, enabling read/write of PLC programs, data, and control outputs.

UsuarioContraseñaAccesoNotas
(vacío / ninguno)
(vacío / ninguno)
APIUser authentication disabled by default; connect via Sysmac Studio over EtherNet/IP TCP 44818 without any credential
Fuente
CISA ICS Advisory

Uso responsable

Esta base de datos enumera credenciales predeterminadas documentadas públicamente para que los administradores puedan encontrarlas y cambiarlas. Úsalas solo en sistemas que poseas o que estés autorizado a probar.

Dispositivos relacionados

Device
OMRON
MR104FH
∅/∅Web UI
Device
OMRON
Default login
∅/∅Web UI
ICS Device
Opto 22
SNAP PAC Controller (S-Series / R-Series)
admin/passwordAPI
ICS Device
Lantronix
XPort AR Embedded Device Server
admin/PASSWeb UI
ICS Device
AVEVA
AVEVA Edge (formerly InduSoft Web Studio / InTouch Edge HMI)
Guest/∅Web UI
ICS Device
National Instruments
CompactRIO (cRIO) Real-Time Controller
admin/∅Web UI