Rittal CMC III Processing Unit (Computer Monitoring and Control III) — Default Password
Default username and password for the Rittal CMC III Processing Unit (Computer Monitoring and Control III): admin / admin. Learn how to log in at 192.168.0.190 and how to change the default credentials.
Rittal CMC III Processing Unit (model 7030.000 / 7030.010 Compact) monitors data-centre environment parameters including temperature, humidity, airflow, and physical access. Ships with admin/admin at factory-default IP 192.168.0.190. The earlier CMC-TC Processing Unit II (7320.100) shares identical defaults. If DHCP is available on first boot the device acquires a DHCP address; 192.168.0.190 is the static fallback when no DHCP server is present. Rittal documentation recommends changing credentials immediately after initial setup and warns the default IP must not remain in production.
| Nom d’utilisateur | Mot de passe | Accès | Version / firmware | Notes |
|---|---|---|---|---|
admin | admin | Web UI | CMC III (all firmware) and CMC-TC II (7320.100) | HTTP/HTTPS web interface. SNMP, FTP, and Telnet are also enabled by default. Factory management IP: 192.168.0.190. |
- IP par défaut
- 192.168.0.190
Utilisation responsable
Cette base de données répertorie les identifiants par défaut documentés publiquement afin que les administrateurs puissent les trouver et les changer. Utilisez-les uniquement sur des systèmes que vous possédez ou que vous êtes autorisé à tester.