Shelly (Allterco Robotics) Gen1 Smart Relay / Plug — Default Password
Default username and password for the Shelly (Allterco Robotics) Gen1 Smart Relay / Plug: (blank) / (blank). Learn how to log in and how to change the default credentials.
Shelly Gen1 devices (Shelly 1, 1L, 2.5, Plug S, etc.) expose a web UI and HTTP REST API with no authentication by default. Access is restricted only to the device's Wi-Fi AP (SSID: shelly-XXXXXX). If the RESTRICT LOGIN feature is enabled, the default credential is admin/admin.
| Username | Password | Access | Notes |
|---|---|---|---|
(blank / none) | (blank / none) | Web UI | Default state: no authentication. Any device on the same network can access the HTTP API and web UI without credentials. |
admin | admin | API | Default credential when RESTRICT LOGIN is manually enabled in Internet & Security settings. |
- Source
- vendor documentation
Responsible use
This database lists publicly documented default credentials so administrators can find and change them. Only use these on systems you own or are authorized to test.
Related devices
IoT Device
Raspberry Pi
Raspberry Pi OS
pi/raspberrySSHIoT Device
FriendlyElec
NanoPi SBC
root/faSSHIoT Device
Raspberry Pi Foundation
Raspberry Pi OS (Raspbian)
pi/raspberryConsoleIoT Device
BeagleBoard.org
BeagleBone Black
debian/temppwdSSHIoT Device
Hardkernel
ODROID Single Board Computer
odroid/odroidSSHIoT Device
Orange Pi
Orange Pi SBC
root/orangepiSSH