Shelly (Allterco Robotics) Gen2 / Plus / Pro Smart Device — Default Password
Default username and password for the Shelly (Allterco Robotics) Gen2 / Plus / Pro Smart Device: admin / (blank). Learn how to log in and how to change the default credentials.
Factory default has no authentication enabled (open access). If authentication is enabled, the username is always 'admin' with a user-set password. Applies to Shelly Plus/Pro series and all Gen2 devices.
| Username | Password | Access | Version / firmware | Notes |
|---|---|---|---|---|
admin | (blank / none) | Web UI | Gen2/Plus/Pro | — |
Responsible use
This database lists publicly documented default credentials so administrators can find and change them. Only use these on systems you own or are authorized to test.
Related devices
IoT Device
Shelly (Allterco Robotics)
Gen1 Smart Relay / Plug
∅/∅Web UIIoT Device
Raspberry Pi
Raspberry Pi OS
pi/raspberrySSHIoT Device
FriendlyElec
NanoPi SBC
root/faSSHIoT Device
Dresden Elektronik
deCONZ / ConBee II / RaspBee II Zigbee Gateway (Linux Gateway Image)
pi/raspbeegwSSHIoT Device
Creality
Sonic Pad Klipper Controller
root/cxsw-sonic_2023SSHIoT Device
Barix
Instreamer / Exstreamer (SoundScape Series)
Admin/AbarixWeb UI