Juniper Networks SRX Series Firewall / Services Gateway (JunOS) — Default Password
Default username and password for the Juniper Networks SRX Series Firewall / Services Gateway (JunOS): root / (blank). Learn how to log in at 192.168.1.1 and how to change the default credentials.
Same credential policy as EX switches. Management IP 192.168.1.1 on SRX100/SRX110/SRX210. SSH and J-Web are disabled until a password is set.
| Username | Password | Access | Version / firmware | Notes |
|---|---|---|---|---|
root | (blank / none) | Console | JunOS all versions | Factory default — no password. J-Web disabled until root password set. |
- Default IP
- 192.168.1.1
Responsible use
This database lists publicly documented default credentials so administrators can find and change them. Only use these on systems you own or are authorized to test.
Related devices
Switch
Juniper Networks
EX2300 / EX3400 / EX2300-C Series Ethernet Switch (Junos OS)
root/∅ConsoleSwitch
Juniper Networks
EX Series Switch (JunOS) — EX2300 / EX3400 / EX4300 / EX4600
root/∅ConsoleRouter
Juniper Networks
MX Series Router (Junos OS — MX204 / MX480 / MX960 / MX10003 / MX10004)
root/∅ConsoleFirewall
Juniper Networks
SRX Series Firewall (SRX300 / SRX320 / SRX340 / SRX345 / SRX550 / SRX1500 — Junos OS)
root/∅ConsoleSwitch
Juniper Networks
EX Series Switch (EX2300 / EX3400 / EX4300 / EX4600 — Junos OS)
root/∅ConsoleSwitch
Juniper Networks
EX Series Switch (JunOS)
root/∅Console